台湾世界级机械磨潤工程专家--游憲一 [复制链接]

上一主题下一主题查看指定楼层

离线游春波

前任管理

发帖: 6734

金钱: 54611

贡献值: 193

交易币: 209

好评度: 1569

家乡: 广东省河源市

性别: 男

只看楼主倒序阅读使用道具楼主发表于: 2008-04-16

;PrL)!	游憲一 (You, Hsien-I), 教授
	電話	04-2840433 ext.314　　或 2851832
	傳真	04-2877170　或 2851832
	E-mail	hiyou@nchu.edu.tw

;PrL)!

學歷
畢/肄業學校	國別			主修學門系所			學位	起訖年月
台灣大學	R.O.C.			機械系			學士	5608-6007
西北大學	U.S.A.			機械系			碩士	6208-6406
台灣大學	R.O.C			機械系			博士	7008-7507
與專長相關之經歷
服務機關			服務部門/系所			職稱
中山科學院			第二所			助研究員
中興大學			機械系			講師、副教授
專長
多孔性流與熱傳		磨潤工程			表面科學
研究方向
1.薄膜結構與磨潤性質 2.表面潔淨技術

;PrL)!

教授課程
大學部	流體力學
研究所	高等工數、磨潤工程、熱工系統設計
碩專班	磨潤工程

;PrL)!

研究計劃

計劃名稱

擔任工作

起訖年月

輔助機構

外部供氣式多孔性頸軸承之分析與製作

主持人

92 年 08 月 01 日 ~ 93 年 07 月 31 日

行政院國家科學委員會

鍍膜表面在滑動接觸時之摩擦與磨耗機構探討

主持人

90 年 08 月 01 日 ~ 91 年 07 月 31 日

行政院國家科學委員會

在乾燥或潤滑情況下，探討兩粗糙面間之吸附力及摩擦力(1/2)

主持人

88 年 08 月 01 日 ~ 89 年 07 月 31 日

行政院國家科學委員會

接觸面間吸引力及摩擦力研究

規劃研究

880801-900731

國科會

論文發表 (Publications)

A. 期刊論文

You, H. I., and Lu, S. S., 1987, "Inertia Effect in Hydrodynamic Lubrication with Film Rupture," ASME J. of Tribology，Vol. l09, pp. 86-90.(SCI) ;PrL)!
You, H. I., and Koh, J. C. Y., 1987, "A Numerical Analysis of Heat Transfer in Microstructures," J. of College of Science and Engineering, National Chung-Hsing University. ;PrL)!
You, H. I., and Lu, S. S., 1988, "The Effect of Fluid Inertia on the Operating Characteristics of a Journal Bearing," ASME J. of Tribology, Vol.110, pp.499-502.(SCI) ;PrL)!
You, H. I., 1988, "Effect of Geometry on Hydrodynamic Lubrication of a Convergent-Divergent Bearing Considering fluid Inertia," Society of Theoretical and Applied Mechanics of the R.O.C., Vol.4, No.2, pp. 107-113. ;PrL)!
You, H. I., 1989, "Experimental Determination of Heat Transfer Coefficient Between a Microstructure and Fluid," International Communication in Heat and Mass Transfer, Vol. 16, No.4, pp.537- 546. ;PrL)!
You, H. I., 1990, "The Lubrication of a Lightly Loaded Sliding Cylinder in Normal Motion," ASME J. of Tribology, Vol.112, pp.153-155.(SCI) ;PrL)!
You, H. I., 1991, "A Transient analysis of a Cylindrical Slider Started impulsively," Journal of the Chinese Institute of Engineering, Vol. 14, N0.2, pp.223-230. ;PrL)!
You, H. I., and Lu, S. S., 1991, "Effect of Fluid Inertia on the Operating characteristics of a Cylinder-Plane Bearing," STLE Tribology Trans., Vol.34, No.l, pp.59-62﹒ ;PrL)!
You, H. I., 1991, "The Stepwise Transient Analysis of a Lubricating Film in Combined Translating and Normal Motion," Journal of the Chinese Society of Mechanical Engineers, Vol.12, No.6, pp.601-610. ;PrL)!
You, H. I., and Hsia,J.H.,1995,"The Influence of Friction-Speed Relation on the Occurrence of Stick-Slip Motion," ASME J. of Tribology, Vol.117, pp.450-455.(SCI) ;PrL)!
You, H. I., and Yu, C. S., 1997, "Effect of Surface Roughness on Low Sliding Friction and Dry Surfaces with Elastic Contact," J. of CSME, Vol. 18, N0.4, pp.371-377.(EI) ;PrL)!
You, H. I., and Shyr, D. M., 1997, "investigation of Friction and Wear Properties of Polyethylene Sliding against Metal Surface," J. of CSME, Vol.18, No.5, pp.477-483.(EI) ;PrL)!
You, H. I., and Lin, W. Y., 1997, "Stiction Effect of Lubricated Film on Friction Properties and Stick-Slip Motion in Two Planar Contact Surfaces," J. of CSME, Vol.18, No.6, pp.579-585.(EI) ;PrL)!
You, H. I., and Chang, C. H.,1 997, "Determination of Flow Properties in Non-Darcian Flow," ASME J. of Heat Transfer.Vol.119, No. l, pp. 190-192.(SCI) ;PrL)!
You, H. I., and Chang, C. H., 1997, "Numerical Prediction on Heat Transfer Coefficient of Pin-Fin Channel Flow," ASME J. of Heat Transfer. Vol.119, No.4, pp.840-843.(SCI) ;PrL)!
You, H. I., and Chung, S. C., 1998, "Friction Induced Self-Excited Vibration in Dry and Lubricated Sliding Contact," J. of CSME, Vol.19, No.4, pp.411-416.(EI) ;PrL)!
You ,H. I.，and Song, J. S., 1998, "Heat Transfer Analysis of Non-Darcian Flow in Local Thermal Non-Equilibrium," J. of CSME,Vol19, No.6, pp. 75-80.(EI) ;PrL)!
You, H. I., Shyy, J. H., and Hwang, H.Y., 1999, "Effects of Surface Roughness on the Elastic-Plastic Contact Between the Fractal Rough Surface and a Plane," J. of CSME, Vol.20, No.3, pp. 247-255.(EI) ;PrL)!
You, H. I., and Hwang, H. Y., 1999, "Effects of Surface Conformity on the Contact Between Two Rough Surface," J. of CSME, Vol.20, No.3, pp.309-315.(EI) ;PrL)!
You, H. I., and Chung, C. H., 2000, "Experimental Study on Heat Transfer and Friction in Pin Fin Channel Flow," J. of the Chinese Institute of Engineers, Vol. 23, No.1, pp.117-123.(SCI) ;PrL)!
You, H. I., and Yang, M. Y., 2000, “Investigation of Ideal Machining Conditions from The Study of Chip Geometry During Turning Operation,” J. of Engineering, National Chung-Hsing University, Vol.11, No.1, pp.17-23. ;PrL)!
You, H. I., and Lee, K.Y., 2001, “Investigation of Metallic Surface Energy Due to the Effects of Surface roughness and Material Hardness,” CSME, Vol. 22, No.3, pp.203-208. (EI)

23. ;PrL)!
You, H. I., and Liou, S. D., 2002, “Removal by Liquid Immersion of Small Particles from a Smooth Surface,” CSME, Vol.23, No.5, pp.451-457. (EI) ;PrL)!

24. ;PrL)!
Jerry C. T. Su, H. I., You, and J. X. Lai, 2003, “Numerical Analysis on Externally Pressured High-Speed Gas-Lubricated Porous Journal Bearings,” Industrial Lubrication and Triblogy, Vol. 55, No.5, pp.244-250. ;PrL)!

B. 研討會論文

You, H. I., and Lu, S. S., 1985,"Inertia Effect in Hydrodynamic Lubrication of a Steadily Moving Surface over a Stationary Surface," The 9th. National Conference on Theoretical and Applied Mechanics, Taipei, Taiwan. ;PrL)!
You, H. I., and Lu, S. S., 1986, "The Influence of Fluid Inertia and Surface Tension on the hydrodynamic Lubrication of a Journal Bearing," CSME, Proceeding of the 3th National Conference on Mechanical Engineering-Heat Flow, Chunh-Li, Taiwan.
You, H. I., and Koh, J. C. Y., 1987, "Analysis of Heat Transfer of Porous Material in a Two-Dimensional Channel," The 11th National Conference on Theoretical and Applied Mechanics, Chung-Li Taiwan. ;PrL)!
You, H. I., 1988, "Effect of Geometry on Hydrodynamic Lubrication of a Convergent-Divergent Bearing Considering Fluid Inertia," Society of Tribologists and Lubrication Engineers, The 43rd Annual Meeting, Cleveland, Ohio, U.S.A. ;PrL)!
You, H. I., 1989, "A New Computational Algorithm for the Transient Analysis of a Lubricating Film," Proceeding of U.S./Taiwan Joint Symposium on Tribology, National Taiwan University. ;PrL)!
You, H. I., 1990, "The Stepwise Transient Analysis of a Lubricating Film Started Impulsively," Japan International Tribology Conference, Nagoya. ;PrL)!
You, H. I., and Hsia, J. H., 1993, "The Influence of Friction-Speed Relation on the Occurrence of Stick-Slip Motion," CSME, Proceeding of the 10th National Conference on Mechanical Engineering-Heat Flow, Taiwan. ;PrL)!
You, H. I., and Song, J. S. 1994, "Heat Transfer Analysis of Non-Darcian Flow in Local Thermal Non-equilibrium with Porous Medium," CSME, The llth National Conference on Mechanical Engineering , Tai-Chung, pp. 543-550. ;PrL)!
You, H. I,and Lin, W. Y. 1995, "Sliding Friction and Stick-Slip Motion of Two Contact Surfaces in Dry and Lubricated Conditions," CSME, Proceedings of the l2th National Conference on Mechanical Engineering, pp.837-842. ;PrL)!
You, H. I., and Chang, C. H., l996, "Numerical Study on Flow and Heat Transfer Behavior of Pin-Fin Porous Medium Flow," The 2Oth National Conference on Theoretical and Applied Mechanics, Taipei Taiwan, pp.50-56. ;PrL)!
You, H. I., and Chang, C. H., 1997, "Experimental Study on Heat Transfer and Friction in Pin Fin Channel Flow," The 2lth National Conference on Theoretical and Applied Mechanics, Tai-Chung, Taiwan, pp.105-110. ;PrL)!
You, H. I., and Chung, S. C., 1997, "Friction Induced Self-Excited Vibration in Dry and Lubricated Sliding Contact," CSME, Proceeding of the 14th National Conference on Mechanical Engineering-Heat Flow, pp.536-540. ;PrL)!
You, H. I., Shyy, J. H., and Hwang, H. Y., l998, "The Elastic-Plastic Contact Between the Fractal Simulated Rough Surface and a Plane," CSME, Proceeding of the l5th National Conference on Mechanical Engineering-Heat Flow,pp.689-696. ;PrL)!
You, H. I., and Hwang, H. Y., 1998, "Effects of Surface Conformity on the Contact Between Two Rough Surface," CSME, Proceeding of the 15th National Conference on Mechanical Engineering-Heat Flow, pp. 72 ;PrL)!