台湾世界级机械磨潤工程专家--游憲一 [复制链接]

@m`H~]AU  

@m`H~]AU  

論文發表 (Publications)

A. 期刊論文

1. You, H. I., and Lu, S. S., 1987, "Inertia Effect in Hydrodynamic Lubrication with Film Rupture," ASME J. of Tribology，Vol. l09, pp. 86-90.(SCI) @m`H~]AU  
   
2. You, H. I., and Koh, J. C. Y., 1987, "A Numerical Analysis of Heat Transfer in Microstructures," J. of College of Science and Engineering, National Chung-Hsing University. @m`H~]AU  
   
3. You, H. I., and Lu, S. S., 1988, "The Effect of Fluid Inertia on the Operating Characteristics of a Journal Bearing," ASME J. of Tribology, Vol.110, pp.499-502.(SCI) @m`H~]AU  
   
4. You, H. I., 1988, "Effect of Geometry on Hydrodynamic Lubrication of a Convergent-Divergent Bearing Considering fluid Inertia," Society of Theoretical and Applied Mechanics of the R.O.C., Vol.4, No.2, pp. 107-113. @m`H~]AU  
   
5. You, H. I., 1989, "Experimental Determination of Heat Transfer Coefficient Between a Microstructure and Fluid," International Communication in Heat and Mass Transfer, Vol. 16, No.4, pp.537- 546. @m`H~]AU  
   
6. You, H. I., 1990, "The Lubrication of a Lightly Loaded Sliding Cylinder in Normal Motion," ASME J. of Tribology, Vol.112, pp.153-155.(SCI) @m`H~]AU  
   
7. You, H. I., 1991, "A Transient analysis of a Cylindrical Slider Started impulsively," Journal of the Chinese Institute of Engineering, Vol. 14, N0.2, pp.223-230. @m`H~]AU  
   
8. You, H. I., and Lu, S. S., 1991, "Effect of Fluid Inertia on the Operating characteristics of a Cylinder-Plane Bearing," STLE Tribology Trans., Vol.34, No.l, pp.59-62﹒ @m`H~]AU  
   
9. You, H. I., 1991, "The Stepwise Transient Analysis of a Lubricating Film in Combined Translating and Normal Motion," Journal of the Chinese Society of Mechanical Engineers, Vol.12, No.6, pp.601-610. @m`H~]AU  
   
10. You, H. I., and Hsia,J.H.,1995,"The Influence of Friction-Speed Relation on the Occurrence of Stick-Slip Motion," ASME J. of Tribology, Vol.117, pp.450-455.(SCI) @m`H~]AU  
    
11. You, H. I., and Yu, C. S., 1997, "Effect of Surface Roughness on Low Sliding Friction and Dry Surfaces with Elastic Contact," J. of CSME, Vol. 18, N0.4, pp.371-377.(EI) @m`H~]AU  
    
12. You, H. I., and Shyr, D. M., 1997, "investigation of Friction and Wear Properties of Polyethylene Sliding against Metal Surface," J. of CSME, Vol.18, No.5, pp.477-483.(EI) @m`H~]AU  
    
13. You, H. I., and Lin, W. Y., 1997, "Stiction Effect of Lubricated Film on Friction Properties and Stick-Slip Motion in Two Planar Contact Surfaces," J. of CSME, Vol.18, No.6, pp.579-585.(EI) @m`H~]AU  
    
14. You, H. I., and Chang, C. H.,1 997, "Determination of Flow Properties in Non-Darcian Flow," ASME J. of Heat Transfer.Vol.119, No. l, pp. 190-192.(SCI) @m`H~]AU  
    
15. You, H. I., and Chang, C. H., 1997, "Numerical Prediction on Heat Transfer Coefficient of Pin-Fin Channel Flow," ASME J. of Heat Transfer. Vol.119, No.4, pp.840-843.(SCI) @m`H~]AU  
    
16. You, H. I., and Chung, S. C., 1998, "Friction Induced Self-Excited Vibration in Dry and Lubricated Sliding Contact," J. of CSME, Vol.19, No.4, pp.411-416.(EI) @m`H~]AU  
    
17. You ,H. I.，and Song, J. S., 1998, "Heat Transfer Analysis of Non-Darcian Flow in Local Thermal Non-Equilibrium," J. of CSME,Vol19, No.6, pp. 75-80.(EI) @m`H~]AU  
    
18. You, H. I., Shyy, J. H., and Hwang, H.Y., 1999, "Effects of Surface Roughness on the Elastic-Plastic Contact Between the Fractal Rough Surface and a Plane," J. of CSME, Vol.20, No.3, pp. 247-255.(EI) @m`H~]AU  
    
19. You, H. I., and Hwang, H. Y., 1999, "Effects of Surface Conformity on the Contact Between Two Rough Surface," J. of CSME, Vol.20, No.3, pp.309-315.(EI) @m`H~]AU  
    
20. You, H. I., and Chung, C. H., 2000, "Experimental Study on Heat Transfer and Friction in Pin Fin Channel Flow," J. of the Chinese Institute of Engineers, Vol. 23, No.1, pp.117-123.(SCI) @m`H~]AU  
    
21. You, H. I., and Yang, M. Y., 2000, “Investigation of Ideal Machining Conditions from The Study of Chip Geometry During Turning Operation,” J. of Engineering, National Chung-Hsing University, Vol.11, No.1, pp.17-23. @m`H~]AU  
    
22. You, H. I., and Lee, K.Y., 2001, “Investigation of Metallic Surface Energy Due to the Effects of Surface roughness and Material Hardness,” CSME, Vol. 22, No.3, pp.203-208. (EI)

23. @m`H~]AU  
You, H. I., and Liou, S. D., 2002, “Removal by Liquid Immersion of Small Particles from a Smooth Surface,” CSME, Vol.23, No.5, pp.451-457. (EI) @m`H~]AU  

24. @m`H~]AU  
Jerry C. T. Su, H. I., You, and J. X. Lai, 2003, “Numerical Analysis on Externally Pressured High-Speed Gas-Lubricated Porous Journal Bearings,” Industrial Lubrication and Triblogy, Vol. 55, No.5, pp.244-250. @m`H~]AU  

B. 研討會論文

1. You, H. I., and Lu, S. S., 1985,"Inertia Effect in Hydrodynamic Lubrication of a Steadily Moving Surface over a Stationary Surface," The 9th. National Conference on Theoretical and Applied Mechanics, Taipei, Taiwan. @m`H~]AU  
   
2. You, H. I., and Lu, S. S., 1986, "The Influence of Fluid Inertia and Surface Tension on the hydrodynamic Lubrication of a Journal Bearing," CSME, Proceeding of the 3th National Conference on Mechanical Engineering-Heat Flow, Chunh-Li, Taiwan.
3. You, H. I., and Koh, J. C. Y., 1987, "Analysis of Heat Transfer of Porous Material in a Two-Dimensional Channel," The 11th National Conference on Theoretical and Applied Mechanics, Chung-Li Taiwan. @m`H~]AU  
   
4. You, H. I., 1988, "Effect of Geometry on Hydrodynamic Lubrication of a Convergent-Divergent Bearing Considering Fluid Inertia," Society of Tribologists and Lubrication Engineers, The 43rd Annual Meeting, Cleveland, Ohio, U.S.A. @m`H~]AU  
   
5. You, H. I., 1989, "A New Computational Algorithm for the Transient Analysis of a Lubricating Film," Proceeding of U.S./Taiwan Joint Symposium on Tribology, National Taiwan University. @m`H~]AU  
   
6. You, H. I., 1990, "The Stepwise Transient Analysis of a Lubricating Film Started Impulsively," Japan International Tribology Conference, Nagoya. @m`H~]AU  
   
7. You, H. I., and Hsia, J. H., 1993, "The Influence of Friction-Speed Relation on the Occurrence of Stick-Slip Motion," CSME, Proceeding of the 10th National Conference on Mechanical Engineering-Heat Flow, Taiwan. @m`H~]AU  
   
8. You, H. I., and Song, J. S. 1994, "Heat Transfer Analysis of Non-Darcian Flow in Local Thermal Non-equilibrium with Porous Medium," CSME, The llth National Conference on Mechanical Engineering , Tai-Chung, pp. 543-550. @m`H~]AU  
   
9. You, H. I,and Lin, W. Y. 1995, "Sliding Friction and Stick-Slip Motion of Two Contact Surfaces in Dry and Lubricated Conditions," CSME, Proceedings of the l2th National Conference on Mechanical Engineering, pp.837-842. @m`H~]AU  
   
10. You, H. I., and Chang, C. H., l996, "Numerical Study on Flow and Heat Transfer Behavior of Pin-Fin Porous Medium Flow," The 2Oth National Conference on Theoretical and Applied Mechanics, Taipei Taiwan, pp.50-56. @m`H~]AU  
    
11. You, H. I., and Chang, C. H., 1997, "Experimental Study on Heat Transfer and Friction in Pin Fin Channel Flow," The 2lth National Conference on Theoretical and Applied Mechanics, Tai-Chung, Taiwan, pp.105-110. @m`H~]AU  
    
12. You, H. I., and Chung, S. C., 1997, "Friction Induced Self-Excited Vibration in Dry and Lubricated Sliding Contact," CSME, Proceeding of the 14th National Conference on Mechanical Engineering-Heat Flow, pp.536-540. @m`H~]AU  
    
13. You, H. I., Shyy, J. H., and Hwang, H. Y., l998, "The Elastic-Plastic Contact Between the Fractal Simulated Rough Surface and a Plane," CSME, Proceeding of the l5th National Conference on Mechanical Engineering-Heat Flow,pp.689-696. @m`H~]AU  
    
14. You, H. I., and Hwang, H. Y., 1998, "Effects of Surface Conformity on the Contact Between Two Rough Surface," CSME, Proceeding of the 15th National Conference on Mechanical Engineering-Heat Flow, pp. 72 @m`H~]AU